Cart 0
Minn Kota MKP-10 Prop Nut and Washer for 80lb and 70lb Motors

Minn Kota MKP-10 Prop Nut Kit (1/2" Shaft) | 70lb - 80lb

1865011
  • We have 1 in stock.
Shipping calculated at checkout.
Ships from Winnipeg Fast Canadian Shipping
No Customs Fees for Canadians
Authorized Service Center We Fix What We Sell

Compatibility:

✅ Compatible Minn Kota Motors
Fits most 24V motors with 1/2" Shaft:
• Terrova 80 (24V)
• Ulterra 80 (24V)
• Fortrex 80 (24V)
• Maxxum 70 / 74 / 80 (24V)
• PowerDrive 70 (24V)
• Vector / Vantage 80

✅ Compatible Props
Fits MKP-2, MKP-6, MKP-7, MKP-32 (Weedless Wedge 2), MKP-33.

❌ NOT Compatible
• 12V Motors (55lb, 45lb) - Requires MKP-9 (3/8" Shaft)
• 36V Motors (112lb) - Requires MKP-34 (Prop Nut Kit D)
• QUEST Series (Brushless) - Requires MKP-40 Hardware

The Spare You Must Carry

A dropped prop nut can end your fishing trip instantly. The Minn Kota MKP-10 is the genuine replacement hardware kit for Minn Kota motors with a 1/2" Prop Shaft. This typically includes most 24-Volt (70lb to 80lb thrust) models.

Corrosion Resistant:

Includes a marine-grade Nylock nut that resists backing off under vibration and a large washer to protect the prop hub. Keep a spare in your boat box so you are never stranded.

📦 Product Specs:

  • Part Number: 1865011 (MKP-10)
  • Shaft Size: 1/2" Diameter
  • Kit Type: "Prop Nut Kit B"
  • Includes: Nylock Nut & Washer
🍁 Why Buy from PTG Electronics?
We are Canada’s specialized marine electronics hub and authorized service center. Unlike American retailers, we stock our inventory in Winnipeg, Manitoba. You get your gear faster with zero customs fees or hidden duties.

Frequently Asked Questions

Will this fit my 112lb Terrova?

No. The 112lb (36V) motors use a different nut kit called MKP-34 (Kit D). Even though the shaft looks similar, the 112lb requires heavier hardware. This MKP-10 is specifically for the 80lb and 70lb (24V) class motors.

Will this fit my 55lb PowerDrive?

No. The 55lb (12V) motors have a thinner 3/8" prop shaft. You need the MKP-9 (Kit A) for those motors. If you try to use this MKP-10, the nut will be too big and won't thread on.

Does it include the shear pin?

Generally, no. The MKP-10 kit (1865011) is strictly the Nut and Washer. The drive pin (shear pin) usually comes with the propeller itself, not the nut kit. If you need a pin, you should check your specific prop model or buy a shear pin kit separately.